Download:
 FragFX Pro Wireless / Tweak Utility V3.04 (2010.02.23)
 Video zum Upgrade

Tips & Tricks:

For MW2, we recommend setting it to Level 4 or 5 in the Utility, then in-game setting between 8-10.

The Frag Pro has an automatic sleep mode that it engages after 5 minutes of no play - in fact it is better NOT to switch off the units. If you are not going to use your Frag Pro for a day or more - it is recommended to remove the batteries.

To adjust the speed for rapid fire press up or down on the directional pad before selecting target button. repeated presses will increase or decrease the speed.

In the event there is RF interference that causes the Frag Pro to disconnect, the on/off switch can be used for quick reconnection (see manual for details).

Reset & Firmware upgrade:
Mouse: Switch off the mouse. Then push R3 and start AND switch on your mouse - at the same time. After that, run the firm.
FragChuck: FragChuck: Switch off the FragChuck. Then push Select and L3 AND switch on your FragChuck - at the same time. After that, run the firm.

Macro set up steps :
1) Press the MACRO key button then release, if the red light flashes then the pro is ready for setting MACRO.
2) Press L1 or L2 key and release, now it is ready to set MACRO combination.
3) Key in the function that you want to set to MACRO, (the red light is off now.) Then press the MACRO key button and the red light should be on again. Now you have completed step 1
4) To conclude: You can set up maximum 12 steps, when all the steps are set, the red light is gone and the blue light is on - and now is out from MACRO setting up status. You can press the MACRO key when the set up is completed - or if use all 12 steps (the maximum) to set up the MACRO - then it will conclude the setup automatically.
5) MACRO set up is completed now, when you press L1 or L2 key, you can use you programmed MACRO function.

Remarks :
a) D-PAD, L1,L2,R1,R2, LX,LY, “△”,“□”,“○”,“※” are all the keys that can be set for MACRO
b) To disable the settled MACRO function, repeat steps 1 and 2, then press MACRO key to exit.